Digital Head-Up Display – Universal GPS Speedometer with KMH/MPH

GPS HUD Speedometer – Dual Chip Head-Up Display:

• Compatibility: Universal fit for cars, SUVs, and trucks with a USB port or 12V accessory socket
• Feature: GPS + BeiDou dual chip positioning with a 10Hz refresh rate for a lag-free speed readout
• Display: HD LED digits, green, readable in direct sunlight and at night
• Size / Dimensions: Approximately 7.5 to 8cm (2.95 to 3.15in) wide, 5cm (1.96 to 2.13in) tall, 3 to 4cm (1.2 to 1.6in) deep (AliExpress listing renders this slightly differently across images, so treat it as approximate)
• Install Type: Plug and play, no wiring into the vehicle
• Power: USB (5V), cable approximately 200cm (78.74in) long, connects to a USB port or cigarette lighter/car charger port
• Units: Switches between KMH and MPH
• In the Box: HUD unit, USB power cable, adhesive dashboard mount pad
• Sold By: Car Style Studio

A Speed Readout That Sits Right in Your Sightline

The GPS HUD Speedometer is a windshield mounted head up display that reads your real speed from GPS and BeiDou satellites and projects it in bright LED digits at the edge of your dashboard, with no wiring into the car itself. It sets up in minutes, runs off a USB port or your 12V socket, and switches between KMH and MPH so it works whichever unit you drive in.

On this page:

Dual Chip GPS Tracking for a Smooth Reading

This GPS HUD Speedometer uses a combined GPS and BeiDou dual chip receiver with a 10Hz refresh rate, meaning it checks your speed 10 times a second. In practice that means the number on screen keeps pace with real acceleration and braking instead of lagging a second or two behind, which is the main complaint with cheaper single-chip HUD units.

Plug and Play Installation

Installing this GPS HUD Speedometer takes no cutting into your dash or splicing wires. Connect the roughly 200cm USB cable to a USB port or your car’s 12V cigarette lighter socket, set the unit on the dashboard with the included adhesive mount pad, and it’s ready to read. The whole install takes a couple of minutes and leaves nothing permanently altered if you ever want to remove it.

Universal Vehicle Fit

Because it reads speed from satellites rather than tapping into your car’s OBD or speed sensor wiring, this HUD works across cars, SUVs, and trucks that have a USB port or a 12V accessory socket, regardless of make or model. There’s nothing to program or pair to a specific vehicle.

Day and Night Visibility

This GPS HUD Speedometer uses HD LED digits designed to stay legible in direct sunlight as well as after dark, without you needing to dim or adjust anything as the light changes around you.

Auto On and Off, Zero Power Draw

The unit powers up automatically when you start the car and shuts off when you turn it off, so there’s no separate switch to remember. It’s rated to draw zero power once the engine is off, meaning it shouldn’t drain your battery if the vehicle sits for a while, though that’s the manufacturer’s claim rather than something we’ve bench tested ourselves.

Compact Dashboard Design

At roughly 7.5 to 8cm wide and 5cm tall, the housing is small enough to sit at the edge of the dash without blocking your view of the road, with a shaped hood over the display that cuts down on glare. Full case and cable dimensions are shown below.

Frequently Asked Questions

• What is a GPS HUD Speedometer? It’s a small windshield or dashboard mounted display that shows your driving speed using GPS and BeiDou satellite positioning instead of your car’s built in sensors.
• Does it show both KMH and MPH? Yes, it switches between kilometers per hour and miles per hour.
• Do I need to wire it into my car? No, it’s plug and play, powered through a USB port or your 12V cigarette lighter socket.
• Will it drain my battery when the car is parked? It’s built to turn off with the engine and draw zero power while parked, per the manufacturer.
• Can I read it in bright sunlight? Yes, the HD LED display is designed to stay visible in daylight and after dark.
• Will it fit my vehicle? It’s a universal fit for cars, SUVs, and trucks with a USB port or 12V accessory socket, since it isn’t wired to a specific make or model.

Final Word

If you want a clear, accurate speed reading without hunting for your instrument cluster, the GPS HUD Speedometer is a simple, no-wiring way to get one. For more on how automotive head-up displays work, see this overview of automotive head-up displays. Browse the rest of our lineup in the shop.